Major equipment and chemicals used in pest control Part 1
Time Left
--:--:--
A-
A+
Switch Full Screen
Question No. 1
Marks
+1
-0
Time
0:00
☰
Which of the following is a type of thermal fogger used in pest control?
A.
ULV (Ultra-Low Volume) Fogger
B.
Cold Fogger
C.
Propane-powered Fogger
D.
Electric Mister
Question No. 2
Marks
+1
-0
Time
0:00
☰
What is the primary mode of action of anticoagulant rodenticides?
A.
They cause immediate paralysis.
B.
They interfere with blood clotting.
C.
They disrupt the nervous system.
D.
They damage the respiratory system.
Question No. 3
Marks
+1
-0
Time
0:00
☰
Which piece of equipment is best suited for applying insecticidal dust into wall voids and cracks?
A.
Backpack Sprayer
B.
Handheld Duster
C.
Thermal Fogger
D.
Bait Gun
Question No. 4
Marks
+1
-0
Time
0:00
☰
What does PPE stand for in the context of pest control?
A.
Pest Prevention Equipment
B.
Personal Protective Equipment
C.
Pesticide Application Equipment
D.
Primary Pest Extermination
Question No. 5
Marks
+1
-0
Time
0:00
☰
Which of the following is a non-selective herbicide, meaning it will damage or kill most plants it comes into contact with?
A.
2,4-D
B.
Atrazine
C.
Glyphosate
D.
Mecoprop
Question No. 6
Marks
+1
-0
Time
0:00
☰
What is the purpose of calibrating a sprayer before applying pesticides?
A.
To ensure the sprayer is clean.
B.
To mix the pesticide concentrate correctly.
C.
To ensure the correct amount of pesticide is applied over a target area.
D.
To increase the pressure of the sprayer.
Question No. 7
Marks
+1
-0
Time
0:00
☰
Which of the following is an example of a 'botanical' insecticide derived from chrysanthemum flowers?
A.
Abamectin
B.
Spinosad
C.
Pyrethrum
D.
Neem Oil
Question No. 8
Marks
+1
-0
Time
0:00
☰
A ULV (Ultra-Low Volume) fogger is a type of:
A.
Thermal Fogger
B.
Cold Fogger
C.
Steam Sprayer
D.
Dust Applicator
Question No. 9
Marks
+1
-0
Time
0:00
☰
What is the primary target of an Insect Growth Regulator (IGR)?
A.
The adult insect's nervous system.
B.
The insect's digestive system.
C.
The insect's reproductive and developmental processes.
D.
The insect's respiratory system.
Question No. 10
Marks
+1
-0
Time
0:00
☰
Which of the following is a fumigant gas commonly used for treating stored product pests in grain silos?
A.
Chlorine
B.
Phosphine
C.
Carbon Dioxide
D.
Sulfur Dioxide
Question No. 11
Marks
+1
-0
Time
0:00
☰
A bait gun is most commonly used to apply what formulation of insecticide?
A.
Liquid Concentrate
B.
Wettable Powder
C.
Granules
D.
Gel Bait
Question No. 12
Marks
+1
-0
Time
0:00
☰
Which of the following is NOT a common piece of Personal Protective Equipment (PPE) for a pest control operator?
A.
Respirator
B.
Chemical-resistant gloves
C.
Hard hat
D.
Cotton t-shirt
Question No. 13
Marks
+1
-0
Time
0:00
☰
What is the mode of action of neonicotinoid insecticides?
A.
They mimic acetylcholine and overstimulate the nervous system.
B.
They inhibit the production of chitin.
C.
They block sodium channels in nerve cells.
D.
They disrupt the insect's gut lining.
Question No. 14
Marks
+1
-0
Time
0:00
☰
Which pest control method involves using a pest's natural enemies to control its population?
A.
Chemical Control
B.
Biological Control
C.
Mechanical Control
D.
Cultural Control
Question No. 15
Marks
+1
-0
Time
0:00
☰
What does the term 'selective herbicide' mean?
A.
It only works on selected days.
B.
It controls a wide range of different weed species.
C.
It is safe for all animals.
D.
It controls specific types of weeds while leaving others unharmed.
Question No. 16
Marks
+1
-0
Time
0:00
☰
Which of the following is a second-generation anticoagulant rodenticide, often effective in a single feeding?
A.
Warfarin
B.
Diphacinone
C.
Brodifacoum
D.
Pindone
Question No. 17
Marks
+1
-0
Time
0:00
☰
A backpack sprayer is most suitable for:
A.
Fumigating an entire house.
B.
Applying liquid insecticides to a large lawn.
C.
Treating a small, localized infestation of ants.
D.
Applying dust to an attic.
Question No. 18
Marks
+1
-0
Time
0:00
☰
What is the primary function of a synergist like Piperonyl Butoxide (PBO)?
A.
To act as a standalone insecticide.
B.
To increase the effectiveness of other insecticides.
C.
To repel pests.
D.
To attract pests to a trap.
Question No. 19
Marks
+1
-0
Time
0:00
☰
In Integrated Pest Management (IPM), what is the first step?
A.
Chemical Application
B.
Monitoring and Identification
C.
Biological Control
D.
Prevention
Question No. 20
Marks
+1
-0
Time
0:00
☰
Which type of pesticide formulation is a dry powder that is mixed with water to form a suspension?
A.
Emulsifiable Concentrate (EC)
B.
Wettable Powder (WP)
C.
Granule (G)
D.
Dust (D)
Question No. 21
Marks
+1
-0
Time
0:00
☰
Thermal foggers are generally not recommended for indoor use because:
A.
They are not effective indoors.
B.
The heat can damage furniture.
C.
They can create a fire hazard and the fog can be an inhalation risk.
D.
They are too noisy for indoor use.
Question No. 22
Marks
+1
-0
Time
0:00
☰
What is the mode of action of fipronil?
A.
It disrupts the insect's central nervous system by blocking GABA-gated chloride channels.
B.
It inhibits the enzyme acetylcholinesterase.
C.
It mimics juvenile hormones.
D.
It acts as a stomach poison.
Question No. 23
Marks
+1
-0
Time
0:00
☰
What is a major advantage of using bait stations for rodent control?
A.
They are the fastest way to eliminate a large infestation.
B.
They can be placed anywhere without restrictions.
C.
They are non-toxic to all other animals.
D.
They protect the bait from non-target animals and the elements.
Question No. 24
Marks
+1
-0
Time
0:00
☰
Which government agency in the United States is primarily responsible for regulating the sale and use of pesticides?
A.
Food and Drug Administration (FDA)
B.
Department of Agriculture (USDA)
C.
Environmental Protection Agency (EPA)
D.
Occupational Safety and Health Administration (OSHA)
Question No. 25
Marks
+1
-0
Time
0:00
☰
What is the primary purpose of adding a 'spreader-sticker' adjuvant to a pesticide mix?
A.
To make the pesticide smell better.
B.
To improve the adhesion and coverage of the pesticide on the target surface.
C.
To make the pesticide more toxic.
D.
To neutralize the pesticide after application.
Question No. 26
Marks
+1
-0
Time
0:00
☰
Which of the following is a physical or mechanical method of pest control?
A.
Spraying with an insecticide.
B.
Releasing ladybugs to eat aphids.
C.
Setting a snap trap for a mouse.
D.
Applying a herbicide to a weed.
Question No. 27
Marks
+1
-0
Time
0:00
☰
Boric acid is an effective insecticide that works by:
A.
Acting as a neurotoxin.
B.
Disrupting the insect's exoskeleton and acting as a stomach poison.
C.
Inhibiting egg hatching.
D.
Repelling the insect with its odor.
Question No. 28
Marks
+1
-0
Time
0:00
☰
When would a pest control professional choose to use a fumigant?
A.
For a localized crack and crevice treatment.
B.
For controlling termites within the walls of a structure.
C.
For treating a small patch of weeds in a lawn.
D.
For repelling mosquitoes in a backyard.
Question No. 29
Marks
+1
-0
Time
0:00
☰
What is the main difference between first and second-generation anticoagulant rodenticides?
A.
First-generation rodenticides are non-toxic.
B.
Second-generation rodenticides require multiple feedings to be lethal.
C.
First-generation rodenticides require multiple feedings to be lethal, while second-generation are often lethal after a single feeding.
D.
Second-generation rodenticides are only effective on rats.
Question No. 30
Marks
+1
-0
Time
0:00
☰
Which piece of equipment would be most appropriate for treating a large athletic field for grubs?
A.
A handheld sprayer
B.
A bait gun
C.
A granular spreader
D.
A thermal fogger
Question No. 31
Marks
+1
-0
Time
0:00
☰
An 'Emulsifiable Concentrate' (EC) formulation of a pesticide is a:
A.
Dry powder mixed with water.
B.
Liquid concentrate that forms an emulsion when mixed with water.
C.
Ready-to-use aerosol spray.
D.
Solid bait block.
Question No. 32
Marks
+1
-0
Time
0:00
☰
Which of the following is an example of 'cultural control' in an IPM program?
A.
Setting traps
B.
Spraying pesticides
C.
Rotating crops
D.
Releasing beneficial insects
Question No. 33
Marks
+1
-0
Time
0:00
☰
What is the primary risk associated with zinc phosphide rodenticides?
A.
They are not very effective.
B.
They are slow-acting.
C.
They release a highly toxic phosphine gas when they come into contact with stomach acid.
D.
They are only effective against mice.
Question No. 34
Marks
+1
-0
Time
0:00
☰
A 'contact' insecticide kills pests by:
A.
Being eaten by the pest.
B.
Coming into direct contact with the pest.
C.
Sterilizing the pest.
D.
Repelling the pest from an area.
Question No. 35
Marks
+1
-0
Time
0:00
☰
Why is it important to read the pesticide label before use?
A.
To find out the price of the product.
B.
The label is a legal document that provides instructions for safe and effective use.
C.
To see the marketing claims of the manufacturer.
D.
To learn about the history of the pesticide.
Question No. 36
Marks
+1
-0
Time
0:00
☰
What is the mode of action of organophosphate and carbamate insecticides?
A.
They inhibit the enzyme acetylcholinesterase, leading to nerve overstimulation.
B.
They disrupt the insect's hormonal balance.
C.
They damage the insect's midgut.
D.
They act as desiccants.
Question No. 37
Marks
+1
-0
Time
0:00
☰
What type of pest would a 'pheromone trap' be most effective at monitoring?
A.
Rodents
B.
Cockroaches
C.
Moths
D.
Spiders
Question No. 38
Marks
+1
-0
Time
0:00
☰
A 'systemic' insecticide is one that is:
A.
Applied to the soil and absorbed by the plant, killing insects that feed on the plant.
B.
Sprayed directly onto the insect.
C.
Used to fumigate an entire building.
D.
A natural, plant-derived chemical.
Question No. 39
Marks
+1
-0
Time
0:00
☰
Which of the following is a potential downside of relying solely on chemical pesticides for pest control?
A.
They are always the most expensive option.
B.
Development of pesticide resistance in pest populations.
C.
They are not effective against most pests.
D.
They require no special training to use.
Question No. 40
Marks
+1
-0
Time
0:00
☰
What is the primary function of the nozzle on a sprayer?
A.
To hold the pesticide concentrate.
B.
To mix the pesticide with water.
C.
To create a specific droplet size and spray pattern.
D.
To filter impurities from the pesticide.
Question No. 41
Marks
+1
-0
Time
0:00
☰
What is a 'biopesticide'?
A.
A synthetic pesticide that mimics a biological process.
B.
A pesticide derived from natural materials like plants, bacteria, or minerals.
C.
A pesticide that is only effective against vertebrate pests.
D.
A highly toxic, broad-spectrum pesticide.
Question No. 42
Marks
+1
-0
Time
0:00
☰
Which of the following situations would warrant the use of a HEPA (High-Efficiency Particulate Air) filter in a respirator?
A.
When applying a liquid, non-volatile pesticide.
B.
When working in an area with low oxygen.
C.
When applying a fine insecticidal dust or aerosol.
D.
When mixing a granular pesticide.
Question No. 43
Marks
+1
-0
Time
0:00
☰
What is the 'action threshold' in an IPM program?
A.
The point at which pest control action must be taken to prevent economic or aesthetic damage.
B.
The number of pests killed by a single pesticide application.
C.
The total cost of a pest control treatment.
D.
The time of day when pests are most active.
Question No. 44
Marks
+1
-0
Time
0:00
☰
Which of the following is a common active ingredient in 'insect growth regulator' products?
A.
Fipronil
B.
Bifenthrin
C.
Methoprene
D.
Deltamethrin
Question No. 45
Marks
+1
-0
Time
0:00
☰
Why is proper ventilation crucial after a fumigation treatment?
A.
To help the fumigant penetrate deeper into the structure.
B.
To ensure that all pests have been eliminated.
C.
To safely clear the toxic gas from the treated area before re-entry.
D.
To activate the fumigant gas.
Question No. 46
Marks
+1
-0
Time
0:00
☰
Which of the following is an example of a 'desiccant dust' used for pest control?
A.
Talcum powder
B.
Diatomaceous Earth
C.
Wettable Powder
D.
Granular Bait
Question No. 47
Marks
+1
-0
Time
0:00
☰
What is the main advantage of using a 'cold fogger' over a 'thermal fogger' for certain applications?
A.
Cold foggers create a much denser fog.
B.
Cold foggers can be used with a wider range of pesticide formulations, including water-based products.
C.
Cold foggers are silent during operation.
D.
Cold foggers require no electricity.
Question No. 48
Marks
+1
-0
Time
0:00
☰
Which pest is commonly targeted with 'termite rods' or soil injection equipment?
A.
Cockroaches
B.
Subterranean termites
C.
Bed bugs
D.
Ants
Question No. 49
Marks
+1
-0
Time
0:00
☰
What is the primary reason for wearing chemical-resistant boots instead of regular work boots during a pesticide application?
A.
They are more comfortable for long periods of walking.
B.
They are less expensive than leather boots.
C.
They prevent pesticides from being absorbed through the feet and are easier to decontaminate.
D.
They provide better traction on wet surfaces.
Question No. 50
Marks
+1
-0
Time
0:00
☰
In the context of herbicides, what does 'pre-emergent' mean?
A.
The herbicide is applied after the weeds have already sprouted.
B.
The herbicide is applied before the weeds germinate to prevent them from growing.
C.
The herbicide only works on perennial weeds.
D.
The herbicide is not effective against any weeds.
Question No. 51
Marks
+1
-0
Time
0:00
☰
Which class of insecticides is known for its fast knockdown effect on flying insects?
A.
Organophosphates
B.
Neonicotinoids
C.
Insect Growth Regulators
D.
Pyrethroids
Question No. 52
Marks
+1
-0
Time
0:00
☰
What is the purpose of an 'anti-siphoning device' on a pesticide sprayer?
A.
To increase the spray pressure.
B.
To prevent pesticide from flowing back into the water source.
C.
To mix the pesticide concentrate more thoroughly.
D.
To create a finer mist.
Question No. 53
Marks
+1
-0
Time
0:00
☰
Which of the following is a sign of a rodent infestation?
A.
Shed skins
B.
Frass
C.
Gnaw marks
D.
Mud tubes
Question No. 54
Marks
+1
-0
Time
0:00
☰
What is the primary mode of action of Herbicides that are 'photosynthesis inhibitors'?
A.
They stop the plant from producing proteins.
B.
They interfere with the plant's ability to absorb water.
C.
They block the process of photosynthesis, causing the plant to starve.
D.
They cause the plant to grow uncontrollably.
Submit Test
Mark for Review & Next
Clear Response
‹ Prev
Save & Next ›
📋 Submit Test?
0
Answered
0
Skipped
54
Total
You
cannot
change answers after submission.
Cancel
Submit